Development of UltraProg has advanced to the next PCB revision. Look in the In Development section for more information.
New Website Design
Date added: 15/02/2007
As you can see, we have given our website a much needed update. There is still much to do but everything functions as it shoud so you can browse, purchase and even register with us if you like. Take the time to sign up for our newsletter if you can. More to follow shortly so watch this space.
The Chrysler Type1 & Type 2 Immo Pin Code Reader
Date added: 18/12/2006
The Chrysler Type1 & Type 2 Immo Pin Code Reader project is now complete.
A manual outlining the operation of the 95320 CanCheck programmer can be downloaded from the Here.
We have developed a PIN code reader for Chrysler Type 2 immobiliser's
Date added: 10/11/2006
We have developed a PIN code reader for Chrysler Type 2 immobiliser's with MC68HC908AZ32 micro.
This reader was developed for use by auto-locksmiths.
A picture of the Chrysler Type 2 immobiliser is here and a picture of the development version of the reader we developed is here, this reader is a Type 1 and Type 2 combined reader.
Please note that this reader cannot be purchased via this website. If you require further information about this device or wish to purchase one then please visit this website. A picture of the final unit will be posted shortly.
We now offer a workshop repair service for Mercedes C & E Class
Date added: 04/11/2006
We now offer a workshop repair service for Mercedes C & E Class (manufactured between 1997 and 2002) instrument clusters that have faulty displays.
The fault usually manifests itself as dead pixels within the two outer displays (the larger centre display is rarely, if ever, affected). These clusters cost in the region of £800-00 to replace and no service option other than replacement is offered by Mercedes, also because of the vast number of model/colour variations it is nearly impossible to locate a working secondhand unit.
A picture showing a 2002 CLK instrument cluster with this fault is shown here, a picture of the same cluster after repair is shown here (the alert on the centre display is caused by the cluster being powered up on the workbench and does not relate to this procedure at all).
Price for this service is £200-00 which includes return shipping.
We are pleased to announce our Fiat CD CanCheck Device
Date added: 15/09/2006
We are pleased to announce our Fiat CD (units using ST95320 EEPROM that are fitted to Fiat Punto & Panda etc) CanCheck On and CanCheck Off programmer.
This unit greatly simplifies the bench testing and repair of these very popular units. By simply removing the unit lid and CD deck and then clipping on the supplied 8-pin SOIC test-clip onto the ST95320 EEPROM, you can disable and re-enable CanCheck by a simple one button operation!
The unit can then be tested and/or repaired whilst on the workbench as the unit will be fully operational whilst CanCheck is disabled. Once any test or repair is complete CanCheck can be re-enabled and the unit returned to your customer.
Also, by using this programmer it is very easy to disable CanCheck on these CD units so that they can be re-used in earlier non-CanCheck vehicles (that may have had a cassette only unit fitted) thus allowing these valuable units to be recycled which can only have positive effects on the environment!
A picture of a compatible unit with CanCheck enabled is here and after programming with CanCheck disabled is here. A picture of the main programmer detailing its main features is here. This item can be ordered from the Here.
An update has been made to the BMW Philips CanCheck Off mod
Date added: 04/09/2006
An update has been made to the BMW Philips CanCheck Off mod.